Search Options
Search Results
Multiquip Dry Drilling Granite and Hard Stone
Premium Grade – Turbo Crown Segments Fast drilling & clean holes in Granites and Hard Stones 5/8-11 Female thread – 2″ drilling depth. Fits most standard Hand Drills.
Multiquip Wet Drilling GCB Series
Economy PLUS Series Ecomomy Plus Grade – WET Drilling For medium to hard Cured Concrete, Masonry Materials & Soft Stone Diameters 1″ thru 14″ 14″ Barrell length (additional length bits available upon request). For Hand-Held Drills and upright Core Drill Rigs
Multiquip Wet Drilling CB and CBA Series
Standard Grade Standard Grade – WET Drilling For medium to hard Cured Concrete, Masonry Materials & Soft Stone “A” Series available for soft/abrasive materials (Asphalt & Masonry) Bit Diameters: 3/4″ thru 14″ 14″ Barrell length (additional length bits available upon request). For Hand-Held Drills and upright Core Drill Rigs
Multiquip Wet Drilling PRB Series
Premium Grade Premium Grade – WET Drilling Turbo Segment Design ~ fluted barrel for fast material evacuation. For medium to hard Cured Concrete, Masonry Materials & Soft Stone 14″ Barrell length (additional length bits available upon request). Bit diameters 1″ thru 14″ For Hand-Held Drills and upright Core Drill Rigs
Multiquip SDW225SSA1
225 amp Welder, 6KW, 120/240V Gen, T4F Kubota The SDW225SSA1 welder/generator is a CC/CV output unit that delivers superior arc characteristics and consistent welding quality up to 225 amps. Rated for 6kW, it provides clean/quite operation in both welding and power generation with noise levels at 68.7 dBA. Designed for the construction market, you can depend on the […]
Multiquip GAW180HEA
180 Amps DC, 3KW/120V AC, Honda GX340 Inverter technology improves sine-wave control resulting in cleaner AC/DC output. Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding. Ideal for job site and remote-area service applications Produces 50-180 amps […]
Multiquip DAW500SA4
500 amp Welder, 3KW, 120/240V Gen, T4F Kubota The DAW500SA4 is a powerhouse for CC (constant current) and CV (constant voltage) welding applications. Delivering up to 500 amps during operation. As a generator, this unit provides up to 3 kW of clean, 120/240 AC power. This model is ideal for very large projects that demand high current for penetration when welding or for […]
Multiquip DLW400ESA4
400 amp Welder, 14kW, 120/240V, T4F Kubota This CC (constant current) and CV (constant voltage) welder delivers up to 400 amps during single operation, or 200 amps to both outputs during dual operation. As a generator, this unit provides up to 14 kW of clean, 120/240 AC power. A digital panel display provides both amperage/voltage and troubleshooting information to […]
Multiquip DLW300ESA1
300 amp Welder, 10.5KW, 120/240V, T4F Kubota The DLW300ESA1 welder/generator is a CC/CV output unit that delivers superior arc characterisitcs and consistent welding quality. Rated for 10.5kW, It is the quietest welder/generator in the industry with only 59 dBA at 23 feet. The E-mode feature improves fuel effciency by allowing the operator to weld at […]
Multiquip DLW330X2
340 amp Welder, 10.5 KW, 120/240V, T4F Kubota This CC (Constant Curent) and CV (Constant Voltage) welder delivers up to 340 amps during single operation, or 200 amps to both outputs during dual operation. As a generator, this unit provides up to 10.5 kW of clean, 120/240 AC power. A digital panel display provides both amperage/voltage and troubleshooting […]
Multiquip GAW135H
135 Amps DC, 1.5 KW/120V AC, Honda GX200 135 amps of DC welding power, 1.5kW AC output Dry weight of only 114 pounds (52 kg) Honda GX200 gasoline engine Up to 45% lighter than other welders in its class Can be mounted to service trucks or on high reach baskets Ideal for a wide variety of […]
Multiquip HBC25B
Rebar Cutter, Handheld, 1″ Bar Capacity, 115V Slices rebar up to 1 inch (25 mm) in 3.5 seconds Weighing only 48.5 pounds (22 kg) the unit is easily moved around the job Powered by a 115V electric motor with easily accessible brushes Heat treated steel blades can be rotated to maximize cutting life Hydraulic pump features magnetic […]
Multiquip HBC19B
Rebar Cutter, Handheld, 3/4″ Bar Capacity, 115V Cuts rebar up to 0.75-inches (20 mm) thick in 2.5 seconds 115V, 60 Hz single-phase motor Hydrualic pump features magnetic particle filtering for maximum life Heat-treated steel blades can be rotated to maximize cutting life Weighing only 28.2 pounds (12.8 kg) the unit is easily moved around the jobsite
Multiquip MB25A
Portable rebar bender, bench type, 1″ bar capacity, 115V Bends rebar up to 1-inch (25 mm), up to 180 degrees diameter in seconds Angle adjustment knob allows fine tuning of bending angle Standard foot switch provides the operator the ability to free up hands for safe material handling Driven by a 115-Volt, single-phase electric motor @ 13 amps A […]
Multiquip MUDTUB
Capacity 10 cubic foot (28.m3) Highly durable polyethylene construction resistant to cold weather and UV Our tough Easy Clean tubs can be cleaned in minutes with tap of rubber mallet Resist dents, rust or cracks Mud Tub features 4″ x 4″ rectangular steel feet One year warranty Approximate 1,000 pound (453 kg) capacity
Multiquip MUDTUBW
Capacity 10 foot (28.m3) Highly durable polyethylene construction resistant to cold weather and UV Our tough Easy Clean tubs can be cleaned in minutes with tap of rubber mallet Resist dents, rust or cracks Mud Tub W features heavy duty high impact resistance 8 inch caster wheels One year warranty Approximate 1,000 pound (453 kg) capacity
Multiquip MC3SEA
3cf, Steel Drum, Electric 115V 1Φ , includes stand Ideal for homeowners and small contractors .75 HP 115V single-phase electric motor Mixes 3-cubic feet of concrete Complete with a stand allowing mixer to rotate 360 degrees Wheelbarrow design facilitates movement around the jobsite.
Multiquip Turbo Rim General Purpose Blades
DRY/WET Cutting – Multiple quality grades available. Engineered for Cured Concrete, Masonry and Stone. Blade Diameters for Cut-Off, & Table Saws. Guaranteed quality, performance and operational life. Turbo rim design for very fast, clean cutting. Reference Series: HSLC, GET, GPT, TBL & CHT.
Multiquip Turbo Rim Very Hard Materials Blades
DRY/WET Cutting – Multiple quality grades available. Specially designed to tackle Hard Cured Concrete, Masonry and Stone. Blade Diameters for Cut-Off, & Table Saws. Guaranteed quality, performance and operational life. ‘Wide-sweep’ Turbo rim design for lightning fast, clean cutting. Reference Series: CHST
Multiquip Segmented Combination
DRY/WET Cutting – Special Turbo Segments/ Extra cooling core design. Specially designed to tackle a wide range of materials.. Blade Diameters for Cut-Off, Table and Street (Flat) Saws. Guaranteed quality, performance and operational life. Reference Series: HSC.
